{"id":7400,"date":"2023-01-12T14:27:53","date_gmt":"2023-01-12T14:27:53","guid":{"rendered":"https:\/\/metaforma.ee\/en\/?post_type=product&p=7400"},"modified":"2023-01-13T10:15:08","modified_gmt":"2023-01-13T10:15:08","slug":"peeglisilikoon-310-ml","status":"publish","type":"product","link":"https:\/\/metaforma.ee\/en\/p\/mirror-silicone-310-ml\/","title":{"rendered":"Mirror silicone 310 ml."},"content":{"rendered":"","protected":false},"excerpt":{"rendered":"
Application:<\/strong><\/div>\n
\n

The surface, which is to be applied silicone, should be clean and free of dust, dirt, oil, grease, rust and other substances that impair adhesion. Glass, glazed surfaces, wood must be degreased with alcohol, white spirit or other solvent. Rusty steel surfaces should be cleaned with a wire brush, oxidized metals (e.g. copper, lead) – sanded, and then secured against corrosion. Remove remnants of the old sealant before carrying out maintenance work.<\/span><\/p>\n

It is recommended to perform an adhesion test on the surface before using the product.\u00a0In case of mirrors from unknown manufacturer, an adhesive test should be carried out before gluing. The mirror should be secured in accordance with DIN EN 1036:2001 ‘Glass in building’.\u00a0In case of lacobel tiles from an unknown manufacturer, an application test should be done before gluing to verify whether there is any change in color of the working surface of lacobel tiles.<\/span><\/p>\n

Silicone does not require a primer, but on the specific surfaces there may be a need to use a primer.\u00a0Prior to silicone application the rim should be secured with masking tape. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator at the thread, cut at an angle adjusted to the width of the joint.\u00a0Apply with a manual or pneumatic gun. The product should be applied in parallel, vertical strand or by point application to allow evaporation of curing silicone by-products.\u00a0Do not seal the edges of mirror until the silicone is cured.\u00a0Depending on the size and weight of the mirror, after gluing, it should remain supported by several hours.<\/span><\/p>\n

Silicone can be smoothed with a spatula for silicone spreading that is dampened in a solution of soap<\/span>.\u00a0Use tools from plastic or stainless steel.\u00a0Silicone is cured by reaction with moisture from the air, therefore, the seal should be performed under conditions that allow access of air.<\/span><\/p>\n

Washing of cured sealant with commercially available cleaning agents prolongs the lifespan<\/span>.\u00a0After use, wipe the tools with a paper towel and clean with solvent.<\/span><\/p>\n<\/div>\n

\n

Characteristics:<\/strong><\/p>\n

H-silicone<\/span><\/strong>\u00a0mirror<\/strong>\u00a0is an one-component adhesive without solvents. It is colorless. It has excellent adhesion to most materials and surfaces common in the construction industry: glass, raw and painted wood, tile, brick, concrete, aerated concrete, cement, mortar, laminated glass, metal and most non-malleable plastics. Due to its excellent consistency and color, it allows the edges of mirrors to be sealed. The consistency and color also allow to seal the edges of mirrors.<\/span><\/p>\n<\/div>\n

\n

Usage:<\/strong><\/p>\n